A wet basement can be waterproofed from the inside. The work is usually done for the floor and walls. A concrete coating is applied in this case. The cost of this work is almost the same as the cost of the exterior waterproofing excluding the price of soil excavating. That can be rather costly. If you hire an expert company, such as Tornado Plumbing & Drains, you may be offered some additional options for the interior waterproofing to double the protection against the water. The suggested variants include a vapor barrier, filling cracks with an epoxy injection, installing silicate sealers, or applying special water-protective paint. Our company will readily help if you are still doubtful about what to do with your wet basement.
Methods Of Interior Basement Waterproofing
The first step to pick out the water proofing method right for your basement is identification of the problem. You may need some specific work to prevent condensation, or just coatings and sealants to be applied to keep water away from the basement. All these methods are applied from the inside.
Method 1. Concrete Waterproofing and Foundation Coatings
The water may sometimes seep through any external protection barrier. In such cases, a special coating made from the concrete mix can be applied from the inside. It is especially beneficial when the concrete on the walls is unpainted. After drying out, it looks like a sort of bristled stucco. There are some other materials that are normally applied for protective coatings. Crystalline (elastomeric) is among them. The coating can also be applied to the foundation. It is made from non-fibrous bitumen and used for footings, abutments, foundation and retaining walls, culverts, and wing walls. * The low temperature formula can be applicable as well.
Method 2. Silicate concrete sealers
Silicate is widely used for sealers when your basement coating needs densification. This penetrating sealer consists of small particles which interact with the concrete pores. Silicate reacts chemically and makes up SCH (calcium silicate hydrate). This mineral can be encountered in nature, and it provides additional strength to the surface.
Method 3. Basement Waterproofing Paint
The acrylic waterproof paints are widely used from the exterior for keeping the basement dry. These paints are denser than the common ones. They stick tight to the walls and protect them from moisture. However, if the technology is not used properly, the paint can break down and it won’t stand more than six months since the moment of applying it to the walls.
Method 4. Crawl space waterproofing
The waterproofing membrane is often used when you need to protect your crawl space. It is also called a vapor barrier. The base of this material is plastic. The sheet is 20 mm thick and it helps prevent moisture and pests from penetrating into your house. This membrane is applied either on your small space floor or up the walls. It will be better if in addition to this barrier, you can have insulation, drainage mats, and vent covers in your cellar.
Method 5. Epoxy injection crack repair
Cracks can be of different shape and width. Epoxy injections are applied in this case. The range of viscosity varies for them – it can be either ultra-thin or paste-like, or something in between. The advantage of most epoxies is their compressive strength. It can reach 12,000 psi or more, and that exceeds the strength of concrete. If the cracks need some structural repair, application of epoxies is the only option. Though, remember that these substances can harden for a long time, and it may take hours to complete the cure. That can be explained by the epoxy characteristic feature that lets it flow into and repair even the tiniest crevices. So, allowing much time for that is a big advantage.
Interior Waterproofing Systems
When water has already penetrated inside your home, you should start installing an internal basement waterproofing system which helps redirect this water away from your basement. This technique is not so expensive as some others used for waterproofing. For example, if you waterproof the basement from the outside, it will cost you much more. After the water has been redirected, the internal sealants are applied. This blocks further moisture penetration and possible damage caused by it.
Waterproofing interior basement walls
There is one more method which is applied for small issues in the basement caused by moisture. You can get the walls covered with some concrete coatings. They stick perfectly either to concrete or masonry when they dry out. To create a permanent sealer, densifiers, or silicate-based sealers are applied. They react chemically with wall to make the coating thicker.
- In case of serious problems with water in your basement, the installation of an interior drainage system is needed. The system collects the water leaking into the home from the basement walls. You may also use a vapor barrier. It is made of waterproofing materials, such as aluminum sheeting or plastic. The barrier is installed in crawl spaces or next to the basement walls. While such barriers are mostly used in crawl spaces, they can also be applied along the total length of the foundation walls. That forms a permanent vapor barrier. When there is a need to combine interior drainage systems and basement waterproofing, plastic panels and sheets are required. They are not meant for blocking water that leaks through the walls. They are rather used as a preventive measure against the water coming from the floor. Install waterproofing plastic sheets and panels to support your basement drainage system. The walls will remain dry even if a serious leak occurs. They will just help the water to flow to this drainage system. Such a technique may seem rather expensive. Though you can protect your interior from any sufficient damage by applying it.
In fact inside basement waterproofing is not commonly meant for prevention. It is more like a water management measure meaning that it deals with all the water that has already penetrated into your home.
- Your house may be situated on the slope or it may be built in an area prone to floods. In this case, you will need to get a backwater valve installed to protect your basement from severe water leaking and flooding. When there is a heavy downpour, such a valve will not allow the sewer water to flood the basement from the sink or toilet. It is always better than to restore the water damage because the outcomes of sewer flooding can be disastrous.
- There is one more solution used for the internal waterproofing. It is very complex though effective. The drainage system installation can solve many issues. It depends on the materials and approached used. One of the most common approaches is a French drain with a sump pump. The technique also implies installation of rubber walls, a drainage membrane, and/or water weeping tiles. When all these methods are applied, water runs away smoothly from the basement without causing any damage to its walls.
- If you have a sump pump system already installed, remember that it needs thorough maintenance at least once a year. Try to inspect it on the regular basis to avoid its failure in case of emergency.
- If the windows in your basement are below-grade, they need sealing. Consider that requirement when you plan the interior waterproofing. The fact is that many basements get a lot of moisture through the windows that are improperly installed.
- Of course, you cannot manage drain cleaning and replacement on your own. When you smell mildew or probably notice a clog, address this issue to the professionals.
Why should I waterproof basement inside
There are some specific signs that may indicate that your basement needs more attention because of the moisture collected in it. Detecting them can be your first step toward effective waterproofing.
- Mold or Mildew. Even if there is no standing water in the basement inside, there may be some extensive moisture in its air. That leads to mold and mildew appearance. If you leave this issue unsolved, you can get a sufficient risk to your health.
- Peeling Paint. You may argue that there are some other reasons for the paint peeling off your basement walls apart from excess moisture. You can think about the improper surface preparation for painting or the wrong type of paint used. Though, you should also consider extensive moist as the main reason for that.
- Leaking Walls. The moisture can condense and form dark spots on the bare basement walls. Such a situation can be a result of leaking pipes laid under the layer of concrete. The water may also seep in from the soil on the exterior part of the walls.
- Dry Rot. This is the name for a special kind of fungus. It usually appears on the wooden parts and is of a black or dark brown color. It is a byproduct of wood decay.
- Flooding or Standing Water. If your house has been built on a high water table, water can penetrate into it regularly through some structural faults in the walls or floor. You may also have a yard drainage breach or plumbing issue that cause regular flooding.
Interior Basement Waterproofing cost (near me)
The cost of the interior walls and floor waterproofing by means of concrete coatings approximately equals the exterior waterproofing. The cost of the latter technology, however, does not include excavating the soil which may be rather expensive. If you waterproof the basement from the inside, also consider some additional options, such as installing a vapor barrier, or filling cracks with epoxy injections, or applying the waterproofing paint.
- Concrete Waterproofing – $0.00 and $0.00 per square foot
- Foundation Coatings –
- Silicate Concrete Sealers – $0 to $0 per square foot
- Basement Waterproofing Paint – $0.00 to $0.00 per square foot
Crawl Space Waterproofing
Crawl space encapsulation costs $0,000 to $0,000 on average for sealing and waterproofing, depending on the size and condition of the crawl space, the thickness of the vapor barrier, the number of layers, and the type of insulation.
Cost of Basement Waterproofing Systems
The average cost of waterproofing your basement from the outside with a coating or membrane is $0 to $0 per square foot, which typically includes materials and labor costs.
Basement waterproofing contractors
(why Tornado-Plumbers ? Some robust and attractive reasons)
Tornado Plumbing & Drains is Professional Waterproofing Company for Commercial or Residential New Construction. Here are three reasons to call us:
- Experience: Coatings the foundation of your home or cementitious is no easy task: it takes years of expertise to be able to perform safe and enduring quality repairs. Because waterproofing are an important investment, hiring an experienced waterproofing company is essential.
- Efficiency: Tornado Plumbing & Drains understands, no matter how big your problem is, it needs to be done as soon as possible, so you can go about your daily business.
- Licensing: When you enlist the services of a reliable waterproofing company, you can rest assured knowing a licensed contractor who has extensive knowledge will perform the work. Tornado Plumbing & Drains is insured and fully licensed, guaranteeing you receive the best services possible, as well as ensuring you won’t be held liable for any on-the-job accidents.
– phone number: (647) 784-8448
– address: 45 Chauncey Ave, Etobicoke, ON M8Z 2Z2
– E-mail: email@example.com
– link to contact form: https://tornado-plumbing.com/free-quote
FAQ of basement waterproofing inside
How much does a new basement waterproofing cost?
The average cost to waterproof a basement is $0,000 to $0,000, or between $0 and $0 per square foot for materials and labor.
How to choose basement inside contractors?
- Find contractors on google or dig into internet directories
- Check their portfolio
- Proof of a valid license
- Check reviews
- Get free quotes
- Get an extensive warranty
How to get your help?
- Call us: (647) 784-8448 or send an email: firstname.lastname@example.org
- Get Free Waterproofing Survey.
Is interior or outdoor waterproofing better?
The drain tiles will carry water away from the foundation before it has a chance to enter the basement. … Exterior waterproofing is also more expensive than interior waterproofing, because it requires more work and more material, but it efficiently stops water from getting close to the foundation of your home.
What Are the Benefits of Exterior Basement Waterproofing?
If you waterproof the basement from the inside only, it will not be a permanent and reliable solution. The outer parts of foundation walls can be weakened and the problem will appear again in a while. If you detect some moisture in your basement, remember that there is a certain problem in the outer part of the foundation. Do not neglect the need for exterior waterproofing. If you just disregard it, you may get some health issues because of the mold that will tend to spread all over your house. Only the combination of exterior and interior waterproofing can result in a lot of positive outcomes and the most solid and well-protected basement ever.