CRAWL SPACE REPAIR

Solutions of Crawl Space Repair included:

• Foundation Repair
• Wet Crawspace Repair
• Replacing Support Beam
• Replace Insulation in the Crawl space
• Replacing Crawlspace Plastic.
• Vents Repair

Foundation Repair

Crawlspace repair isn’t exactly a DIY experiment. If the foundation is damaged, there may be a need for replacing piers. That may also require fixing cracks, underpinning to increase its strength, mud-jacking for releveling the house, or other rather costly methods. If we compare steel-based and wooden-based foundations, we will notice that steel-based ones are more difficult to repair and the cost of such fixing is higher than for wooden-based constructions.

Wet Crawl Space Repair

Unfinished crawl spaces in the area of Toronto & GTA can get wet easily because of humid springs and summers. Groundwater also adds much moisture to them. Tornado Plumbing & Drains can make your crawlspace dry. Due to the expert services of the company, the space will be usable. We take into account the following factors:

• Evaporation of standing water. If a crawlspace does not have any encapsulation, it can get the evaporation of moisture from the ground.
• The air from outside. The wet outside air can penetrate into the crawl space through the vents.

Replacing Support Beam

Before replacing a beam, you need a thorough inspection and design from a qualified structural engineer because such a job is a very specific structural form of foundation repair. The engineer needs to consider the overall condition of the foundation, its structure, the placement and number of support columns and their footings. Of course, it is required to know the new beam length.

Search also: Repair vapor barrier in crawl space

Replace Insulation

When the insulation is old and wet, it can collect mildew, mold, and/or rodent excrement on it. If the crawl space is properly insulated, the energy efficiency and home durability increase. It blocks the radon, moisture, and the air from the outside.

Replacing Crawl Space Plastic

Before replacing the crawl space plastic, you need to fix wet insulation, mold, moisture, or any leaks and water damage. Accordingly, the overall cost of repairs will go up. There is a need to replace a vapor barrier when the plastic is damaged, the seals are leaking, or the insulation is wet. Then, this construction will carry out its function of reducing humidity levels.

Search also: Wet crawl space repair

Vent Repair

If the vents in the crawl space are not installed in the right way or not maintained properly, that can lead to the appearance of mildew and mold, wood rot and pests, or excessive moisture, and all that leads to severe structural issues.

Search also: Crawl space structural repair