The Benefits of Basement Waterproofing for Your Toronto Home or Business

Is basement waterproofing a good investment? You bet it is. Unless you don’t want to prevent flooding, cut energy costs, and breathe cleaner indoor air, that is.

These are only a few of the very important benefits of waterproofing your basement. And we have plenty more to share where that came from. 

Below is a guide on all the benefits of basement waterproofing you need in your home. Check them out right here.

Basement Waterproofing Prevents Flooding

Do you use your basement as a guest room, for storage, or something else? Maybe you’re still deciding. In any case, we’re sure that a filthy, indoor lake is not the purpose you have in mind for your basement.

To prevent flooding/water damage to everything you have down there, your basement needs to be waterproofed.

Save Money

Obviously, repairing all the structural damage described above will cost a lot more than waterproofing your basement in the first place. That’s in addition to the cost of replacing any furniture or other personal items ruined by flooding.

Save Energy

Another way basement waterproofing saves money is by reducing your heating and cooling costs. Moisture in your basement evaporates into your indoor air. And high indoor humidity requires your HVAC system to work harder to keep your home at the desired temperature.

Waterproofing stops this humidifying cycle and, thus, reduces your monthly energy bill.

Reduce Health Problems

Humid indoor air also encourages the growth of mold, mildew, and bacteria. As you know, such indoor health hazards are notorious for worsening conditions like asthma and indoor allergies. This combined with humid indoor air means that asthma attacks will be a far more common occurrence in these homes.

But there’s something even worse than that. The indoor mold growth might even contribute to the development of asthma in young children. Waterproofing your basement, then, is essential to improving the health of those in your household.

Protect the Structural Integrity of Your Home

One of the most important things to remember is that your basement is built into the foundation of your home. Thus, any damage to your basement is damage to your foundation. And that’s extremely bad for the structural integrity of the whole building.

First, swelling groundwater cracks through the concrete of your basement. Then, temperature changes expand these cracks even wider. Finally, your warped, cracked foundation wreaks havoc on the floors above.

This type of structural damage can easily become catastrophic.

Increase the Value of Your Home

Furthermore, waterproofing can also make you money. All the benefits on this list can be used as selling points when you decide to sell your home. This is sure to increase the value of your home.

Basement Waterproofing Near You

Do you need basement waterproofing? If you read this guide, and don’t have your basement waterproofed already, then you know the answer is, “Yes.”

We can help. Fill out the form here for a free service quote and we’ll get back to you very soon.

(647) 784-8448

Call us for immediate response

Read More
Clean Out Toilet When Your Plunger Fails

How to Clean Out Toilet When Your Plunger Fails

What can be worse than understanding that your toilet has been corked up and is going to flood instead of flushing? The worse is only your understanding that there is no force cup handy, or that you have never had it in your home. Of course, you should start with the sign “Do Not Utilize” and then rush to the nearest household store. However, you can try some practical tricks to clear up your toilet without any plunger and be happy that such hacks really work effectively.

  1. Vinegar and Baking soda

Take some vinegar and baking soda (2:1). Pour them into the lavatory bowl. Do not dram the water for about half an hour. The effect is the purging of the pipe. However, to make sure, you may pour a bucket of hot water into a pan after half an hour as well.

  1. Hard, or Dish soap, or shampoo?

Get half a cup of dish soap and that will be enough to pour into the lavatory bowl and cleanse it thoroughly. Let it stay in the pan for some time, and then, dram the water. The coat formed on the pipe walls eases the passing of the mass that has caused plugging up. You may not have dish soap handy or run out of it, so you can use the bar of hard soap cutting it into pieces and putting it into the water closet.

Some people also suggest using shampoo or liquid hand soap. They believe that any kind of soap can cope with the waste more efficiently than just pure water poured into the water closet bowl. However, be careful while sluicing. Be prepared to stop the process at any time to avoid the spillover of the water closet.

  1. High-temperature water

A bucket of the high-temperature water poured into the pan can help the corking run through the pipe. Though, remember to pour the hot water slowly, keeping to the waist level so that it couldn’t splash the content of the water closet pan around the bathroom. This method can be combined with using soap. The chances of solving the issue will increase then. Be sure that the water is not boiling lest you should damage the porcelain of the pa.

  1. Using A WIRE HANGER

Everyone is sure to have a wire hanger in their closet. Take it from there and untwist a good piece of it to receive a straight line. Try to use it as the drain snake. First, put it into the pipe and then, poke the plugging mass to make it dislodged. When broken, it will go down easily through the pipes.

  1. A PLASTIC BOTTLE

Whether you like this method or not (similar to using the wire hanger) but it is your real chance to get the unblocked toilet without any other special effort. Take out as much dirty water from the water closet pan as possible. Take a plastic bottle and fill it up with the warm water. Put on a pair of rubber gloves (you may also use two large plastic bags instead). Use your thumb to cover the top of the bottle. Holding your thumb on the bottle’s top, place it at the pipe’s mouth. Quickly remove the thumb and press the bottle to let the water swirl within the pan taking the corking through the pipes of the toilet.

Read More

Useful Tips for the Floor Drain Maintenance

The floor drains are often overlooked when they do not cause any trouble. Though, it is not correct.

Floor drains are similar to those drains in the showers and bathtubs that are located on the surface and flush with it. Most floor drains, however, are located in garages and laundry rooms as well as in basement and bathroom floors. They can also be found on driveways and patios, in all the places where you need quick and effective water drainage.

Homeowners need to think about the maintenance of floor drains because, if ignored for some time, they can cause problems. These problems can be easily avoided when just some simple maintenance and pre-planning actions are applied. Your floor drains will cope with any water flow more efficiently if you follow a certain maintenance plan. That will prevent flooding and damage from any extensive water you may face.

Check the Traps Regularly by Filling Them with Water

As for the indoor floor drains, they prevent overflows from water heaters, washing machines, tubs, toilets, or sinks. The outdoor floor drains help capture the water from heavy rainstorms. The main function of the inner and outer floor drains is to direct the extensive water to a municipal drain or a sewer. They help to keep the floor dry and clean any time. The water traps also block the sewer gases and odors from penetrating into your home. You need to make sure that these traps are working properly by filling them with a gallon of water on a regular basis. Simply, pour this water down the floor drain. The water fills the trap in order to create a barrier between the sewer system and your home.

Clear the Clogs at Once

The different types of debris are always collected on the floor, including dust bunnies or pet hair. They can clog the floor drain in a while. Watch the signs of clogging such as slow draining. To reduce the risk of overflows and flooding, take the clog out as soon as possible. Such a small clog can be removed with a strong pump or a plunger. If the clog hasn’t been removed, pour a mixture of vinegar and baking soda down the drain. You can also apply a drain auger. Put the cable into the drain until you feel the resistance and then, turn the cable round and try to take out the clog.

Regular Cleaning of the Drains Is Essential

You should check and clean the floor drains at least once a quarter. You can use a liquid drain cleaner if it is available or, if your drains haven’t been cleaned for a certain time, call a professional plumber for help. Your local Tornado Plumbing & Drains can assist you with this job. Scheduling the expert drain cleaning for one time a year is also a good idea. That can prevent clogs and provide the smooth running of your drains.

Read More

5 Common Sump Pump Problems

If you want that your basement should always stay dry, it is better to prevent the sump pump problems than to solve them intensively when they have already appeared.

Common Sump Pump Problems blog Tornado Plumbing & Drains

You can pay much more for the repair works if your sump pump goes out of order. You will need to fix it immediately because even a little water can result in huge damage.

First of all, it is important to know what a sump pump is and why you need to take care of it. The sump pump system is developed for pumping water from your house foundation through another pipe, a discharge one. When the sump pump is out of order, the basement can get flooded and the result of it is usually a costly redecoration. Even small amounts of water can lead to much damage, especially if the water is standing and your basement floor is covered with it. In a while, the situation can result in the appearance of nasty mold issues.

Do not wait until your wet basement dries out and the sump pump problems vanish like a bubble. It is always better to avoid such challenges. The first step to it is the correct and reasonable choice of your sump pump.

Here are some common sump pump problems you may encounter.

1.     The pump is overwhelmed

It happens when you didn’t pick out the correct size of your sump pump. Because of that, the equipment is not able to deal with big water volumes. The flooded basement can be an obvious outcome of this wrong choice. Think about another sump pump when a single item does not handle all the water.

2.     Burning out of the pump may happen

There are many reasons why the sump pump can become burnt out. Among them, let us highlight a wrong float switch, the underpowered and overworked pump, and many other causes connected with the incorrect choice. It is especially important to avoid cheap equipment made of inexpensive and undurable components and materials that do not last. They may fail any time right at the moment when you need their steadiness badly, for example, when the winter is extremely wet.

3.       The loss or outage of power leads to sump pump failure

The sump pump can lose its power because of some reason. Among the most common ones, let us mention the unplugged pump, power outage, or a tripped circuit breaker. There are some others but you should remember that no sump pump can work smoothly when there is no power or power outage happens too often.

4.     The intake is blocked

The intake can become clogged or blocked rather often. That does not allow the pump to extract water from a sump line or sump pit.

5.     The discharge line can also be clogged or frozen

The discharge pipe is a part of the equipment that takes water away from the home through the sump pump. This pipe can get clogged with roots or rocks, dirt or sand, and other kinds of garbage. The water in this discharge line can get frozen during the wintertime and block the system completely. 

Solution:

Contact your local waterproofer for an evaluation and estimate! Contact Tornado Plumbing & Drains today to schedule an appointment with your local contractor. They can evaluate your basement or crawl space and provide an estimate on installing a new sump pump system in your home. Looking for a price? Get a no-cost, no-obligation free estimate.

Read More

How to clear a main line blockage?

The beginning of a drain blockage can be seemingly harmless. The water might start bubbling up in the sink and/or drain slower than normal. It may even back up into another sink or bathtub. And you might have to experience a small domestic drama with a plumber. Here is how plumbers tackle a clogged drain.

How Do You Know When Your Main Sewer Drain Is Clogged?

1.      When the water drains out of the pipes slower than usual and you are unable to remedy this with a plunger or chemical drain cleaner. You have made several attempts but all to no avail.

2.      The water goes up into the bathtub after you flush the toilet.

3.      Your sink or toilet fill up with water when you start using the washing machine.

The toilet drain pipe is larger than the other lines in the system. It also has the most direct route to the septic source. Therefore, as long as you have no problems flushing the toilet the blockage in the sink, bathtub or shower shouldn’t be hard to fix.

How To Clear A Main Line Blockage

1.     Shut the water off from the main supply.

2.      Then look around in your yard or basement and try to find the cleanout in the sewer pipe. It shouldn’t be hard to see. Usually it’s a short 4 -inch pipe diameter with a screw-on cap with a square nut or indentation on top. More than likely this pipe will be protruding from the ground somewhere outside the house between the foundation and the road. It also might be off the side of the house where the bathroom is. If you can’t locate it you should contact a plumber.

3.      Remove the cap with your hands. If it proves too hard use a wrench to loosen the cap and then take it off. You should do it slowly to prevent any backed up water from gushing out. Be ready to step aside if it does. You might want to wear waterproof boots and gloves.

4.      Your goal is to let the water out. By releasing the pressure in the sewage line you are letting the excess water drain out.

Main Line Pipe Still Clogged?

Once you reinstall the cleanout cap and test the drain and find it’s still draining slow call a plumber.

What do plumbers use to unclog drains?

Plumbers use different methods and a variety of tools to remove drain blockages. Some of the things they use are electric power augers (also known as plumbing snakes) and high pressure water jetters (plumbing jetters, jet-sets). They may even put an inspection camera down the pipe to examine the problem.

Drain cleaning and unclogging photo picture, Tornado Plmbing
Drain cleaning and unclogging
  1. Powerful motorized augers have long steel cables with a tip that has blades on the end and revolves very much like a drill does. They can clean out lines that are 50-150 feet long. The motor turns the blade equipped tip and feeds the cable into the drain. With a push of the switch the two-way feed will push the cable forward or pull it back. And the blades cut through the blockage. Plumbing snakes are sent down a drain into the plumbing system in your home closest to the blockage.
  • High-pressure water cleaning systems are used to break through grease, sand and even ice! However, they will not remove tree roots that get inside the drain line. This method is used when a blockage is too far down for an auger to reach. Plumbing jetters clean out water lines with powerful jets of water. They are able to reach as far down your pipes as four hundred feet.

Looking for a Plumbing Service near you?

Contact a Tornado Plumbing & Drain! We provide the best services in Toronto. Our team consists of highly qualified contractors. Please consider our offer and give us a call (647) 784-8448.

Read More

A Few Quick Tips to Help You Find the Best Plumbing Services in Toronto

Plumbing is a well-known profession. There are some general problems with water lines that only a plumber can fix. Plumbing services are also necessary for construction and repair jobs. A contractor will install a new drain system, floor drain with primer, back water valve, new water line,it’s ideal for your house or commercial sanitary drain system. Drain system is unique for each and every project. It is very important to install sewer system correct and with accordance to the local building code from the first time, in order to avoid any drain problem in the future or damage from sewer back up, such as a flood in your basement or apartment!!. However, if you run into a problem such as a faucet leak, bathtub or toilet blockage you will need to contact emergency plumbing services in Toronto.

Any plumbing repair job starts out by removing the existing system. If the deinstallation is taking place in an old building there is a good chance of a water line bursting or thread stripping. Therefore, it is necessary to take precautions, otherwise it could lead to bad consequences such as flooding your own place or worse the neighbors’. Toronto means ‘a place where trees grow out of water’. And since plumbers work for the city and in this particular case a city ‘upon water’ there is a lot of work to do.

  1. FIND DIFFERENT CONTRACTORS ON GOOGLE
  2. CHECK THEIR PORTFOLIO
  3. PROOF OF A VALID LICENSE
  4. CHECK REVIEWS
  5. GET FREE QUOTES
  6. GET AN EXTENSIVE WARRANTY

1. FIND CONTRACTORS ON GOOGLE or DIG INTO INTERNET DIRECTORIES

You need to start looking at some of the plumbing services near you and call them. In your conversation you need to ask them questions regarding their qualifications and expertise. A quality plumbing service will readily provide you with answers.

2. CHECK THEIR PORTFOLIO

An expert plumbing company in Toronto should have a portfolio with pictures, videos and links to their previous projects. Although most contractors will post these materials on their web page you need to make sure that they are pictures of real project sites.

3. PROOF OF A VALID LICENSE

Low-cost plumbing services may end up costing you a fortune. It is tempting to save money by hiring someone cheaper but the risks need to be taken into consideration. A professional license is of vital importance! The majority of states require that repair and construction businesses are licensed. Licensing is done by local or state authorities from the Department of Consumption. A licensed business will always have insurance, which is of imminent value especially in jurisdictions where companies are liable.

4. CHECK REVIEWS

Displaying reviews of their previous clients is a trademark of a good company. Read the reviews left by the clients of Plumbing Services in Toronto both on the contractor’s site and on independent sites. There is a clear advantage in hiring a plumber based on positive reviews as their services have already been tested by others.

5. GET FREE QUOTES

Some companies will offer you free quotes whereas others will require a fee.

6. GET AN EXTENSIVE WARRANTY

Some companies can also produce proof of their expertise and a warranty. It is important that a plumbing company stands behind their work and offers additional services free of charge should a problem arise. By choosing wisely you will be able to receive high-quality services at a reasonable price. This will save you not only time and money but a lot of headaches as well!

Looking for a Plumbing Service near you?

Contact a Tornado Plumbing! We provide the best services in Toronto. Our team consists of highly qualified contractors. Please consider our offer and give us a call (647) 784-8448.

Read More

How to Successfully do a Crack Injection. A 2020 Updated Guideline

The term “crack injection” sounds like a very hard to do process. However, truth be told, you only need to know a few steps and this is exactly what I am going to present today. So let’s begin the reading session.

Crack Injection – the Steps

Place injection ports

The Surface Ports are entryways for putting the material for repair into the crack. They reduce the requirement to penetrate into the concrete, therefore decreasing the work time.

Seal the exterior

Crack Injection Photo Description Watch
Crack Injection

Apply an epoxy concrete repair substance to seal the exterior ports and opened cracks. The adhesive needs around 20 – 45 minutes to produce a surface seal with great bond features that hold up below the epoxy injection. Add the paste in the opened crack and leave only the portholes opened.

The Actual Process of Crack Injection

Start injecting at the most lower gate on the wall. Continue the process until the epoxy begins to run out of the port and over it. That is the optical indication that the crack has been loaded to that point.  The next thing that you need to do is to fill the first port with the given cover. After that, move to the next one and start doing the same process again until you are sure that all the crack is filled with epoxy.  

Lift the Ports

When everything is finished, give 24 to 48 hours rest at room temperature for the epoxy to restore and infiltrate within the cracks. The injection ports can be lifted by hitting them with a tool such as a hammer.

The process of crack injection is not a hard one. It can be done in only four easy steps, but for that, you need dexterity, time and tools. Unfortunately, not everybody can do an epoxy concrete repair when their walls need one. This is why there are professional services ready to come and help you. Professionals such as the team from Tornado Plumbing.

Так что, если вы из Etobicoke или Mississauga или даже из их окрестностей, обязательно свяжитесь с нами, и мы сделаем за вас тяжелую работу. Если вы из другого региона, мы будем рады ответить на любые ваши вопросы.

Read More

All you Need to Know about Underpinning. Affordable Underpinning offered by Tornado Plumbing

When building a new structure or only renovate one, underpinning is the method of strengthening the basis known as building-foundation. In this article, we will talk about the reasons why every construction should go under the underpinning process, but most importantly what you should look for when picking a company to make the underpinning for your property.

When is Mandatory to do Underpinning

Underpinning might be required for many reasons such as:

  • The primary foundation is not reliable or durable;
  • The reason why the structure was built has changed;
  • The characteristics of the soil holding the foundation have changed;
  • The building of nearby constructions requires soil excavation;
  • To build another story to an existing building;
  • To prepare for natural disasters such as earthquakes or floods is recommended also to do some basement underpinning and waterproofing.

What you should receive when doing underpinning to your house

There are many companies that offer underpinning services, but when looking for one that offers an affordable underpinning solution, you want to be sure they check some major aspects such as:

  • Initial investigations to decide if extra work is needed;
  • Plan and certification made by an engineer;
  • A complete quotation of the expected work;
  • Construction permission;
  • Foundation stabilization;
  • Jacking of the foundations;
  • Force grouting;
  • Root stops;
  • Plumbing examination to guarantee there are no leaking;
  • Engineer surveillance and certification.

As you can see, there are many reasons why you should consider doing underpinning to your house. Also, there are many aspects when picking a company to work for you. Picking an organization that offers affordable underpinning solutions is not as easy as one might think because most of them reduce the quality of their work along with the price.However, if you are from Etobicoke, Mississauga or surroundings, we, the team from Tornado Plumbing are more than happy to come, take a look at your property and offer the best features for the most affordable underpinning solution.

Read More
Exterior waterproofing Drain cleaning and unclogging photo picture

How Waterproofing can Increase the Price of your House? Secrets Provided by our Experts

We all know how important is to have a house protected by any water intrusion. This kind of “invasion” can come from almost every part of your home, such as roof, basement or walls and can produce severe damage.

This being said, people nowadays, when buying a house are interested in the subject of waterproofing. This means that if you are a house owner you might want to waterproof your property and not only for your own comfort but also in the probability of selling the house at, as real estate agents like to call it, to increase property value.

What raises property value?

You know that when buying a new house, the client is mostly interested in the state of that property. The better it seems, the higher the price.

So let’s see the ways to increase house value when it comes to waterproofing.

These being said, if a possible customer comes to view your property and see minuses such as a sloppy yard, bad roof, and cracked walls, you will probably sell your house at a very bad price, if any.

This is particularly true when considering pool areas because people interested in buying a pool house, they especially want that part to look perfect. Another great important aspect is the basement. If your residence is up on the hill and has a basement made into the hill, it can lead to itself, which could lead to possible water damage if the water is not led away well, making that even a little crack to become a big problem over time.

This is why our experts from Tornado Plumbing, recommend you to do an inspection each year to be sure that any subterranean or surface parts well and won’t provoke any water issues. This will help you very much to increase property value.

In a free market, selling your house can be trickier than you think and getting a good price for your goods is even harder. So, if you are from Etobicoke or Mississauga, give us a call and we will be sure that your house will have everything it needs to have an increased property value.

Read More

Clogged drain – Causes and Solutions Provided by our Experts

There is nothing more stressful than a clogged drain. Why? Because it takes along other issues such as flooding or paying for a clogged drain repair. But let’s see first what causes a blocked drain. This way you will know what not to do.

Clogged drain situations

Food pieces that don’t break like eggshells or grease will build up in your pipelines and produce a clog in your drain in time. This usually happens at your kitchen sink.

Now, moving to bathroom-related issues, hair is a very big issue when it comes to your shower or tub’s drain. But it is not the only problem. Soap is just as responsible. Soap and hair together create a deadly combo for your drains and unless you have a backup drain, you will encounter nasty residues.

How to do a Clogged Drain Repair

Let’s find out the best things you can do to fix your clogged drain.

Using Boiling Water

Boil a big amount of water, at least 4 liters. When is boiling hot, pour it slowly into the drain, leaving some seconds of pause after each pour.

Using a Bent Wire Hanger

Get a normal wire coat hanger and level it out. Turn one end over in a way to generate a little hook. Shove it in the drain cover. You should be capable to get out a lot of things that are obstructing the drain. In the end, turn on hot water.

Using Baking Soda and Vinegar

For this to work, you need to mix a third of a cup of vinegar and a third of a cup of baking soda. Let it fizz and pour it into the drain. Let it sit there for at least one hour before pouring hot water.

Conclusion

As you can see, there are many reasons for why your drain can get clogged. Also, there are things that you can do at home to solve this nasty issue.

However, sometimes the problem may be more serious and old school tricks won’t solve anything. In these cases, you need to contact a specialist to come and do a pipe cleaning.

If you are from Etobicoke, Mississauga or surroundings, the team from Tornado Plumbing is more than happy to assist you in this matter, so don’t hesitate to contact us.

Read More