Basement flooring services in toronto and GTA
Apart from some specific requirements, the basement flooring can be of any kind. The main point is that it should be properly installed to withstand high humidity and moist.
However, there are some exceptions. Such types of flooring as laminate with a fiberboard core and hardwood that hasn’t been treated against moisture are inappropriate choices. They will buckle and warp after absorbing moisture quickly.
As you see, there are a lot of options left for your basement flooring. For example, you may pick out engineered wood, ceramic tile, or rubber. It can also be laminate with a plywood core that is moisture-treated.
On the other hand, the problem may appear not in the flooring only. It is a concrete basement slab that should be considered as well. Very often, it is rather porous, so such a slab is prone to water vapor and moisture. Even if your flooring is unaffected, make sure that a haven for mildew and mold hasn’t been created under it.
That is why it is quite useful to create a barrier for vapor under the flooring. It can be sheet plastic, or epoxy coating, or paint sealed on the slab. They are meant specifically for concrete floors and walls affected by damp.
A poured concrete subfloor may solve your problems with moisture to some extent. Though, concrete is also vulnerable and can be affected by moisture.
There are some other ideas of basement flooring:
- One of the best ways to waterproof your basement floor is epoxy coating. Epoxy is easy to apply and maintain. It can be of different colors, and it is completely waterproof (epoxy basement floor).
- Ceramic tile is a common choice of an interior designer. It comes in a lot of styles and colors. To be totally resistant to moisture, it should be applied on the smooth concrete without any cracks.
- If the concrete is well-prepared, it is worth trying vinyl tile and sheet flooring. Such flooring can withstand even some flooding and it offers some cushioning under your feet. Moreover, it is quite inexpensive.
- Engineered wood flooring is a thin veneer. It consists of hardwood that covers a plywood base. The plywood can hold its shape in different conditions and perform even better than hardwood when it is exposed to moisture.
Waterproof Basement Floor Installation: Step-by-step
If you want to avoid mistakes in flooring installation and save money for materials and maintenance, apply to professionals from Tornado Plumbing & Drains. Here the best flooring options for your basement.
Basement Floor Epoxy Services (Epoxy Floor Coatings)
- Step 1: Clean Concrete Surfaces
- Step 2: Wet Flooring
- Step 3: Prepare Acid-Etching Mixture
- Step 4: Scrub and Etch
- Step 5: Mix Epoxy Coating
- Step 6: Apply Along Perimeter
- Step 7: Roll on Epoxy
- Step 8: Apply a Second Coat
- Step 9: Finish
Ceramic tile Installation
1: Assessment. The space under the tile can get wet easily in the bathrooms and showers. That is why the drywall will be useless there. It is worth installing water resistant backer board. The substrate for tile installation on any type of covering, whether it is plywood, concrete, or backer board, should be clean, sound, and stable in terms of dimensions.
3: Lay out the tiles
4: Cutting the tile
5: Adhering Tiles
6: Grouting tiles
7: Cleaning and sealing
How To Install Vinyl Flooring: Vinyl Tile and Sheet
Vinyl flooring is both water-resistant and waterproof. No damage is caused by exposing it to moisture for a long time. This is the best option for spaces with a tendency to form dampness, for example, in basements. If flooding occasionally occurs in your basement, vinyl is exactly what you need. This material is actually plastic, so it does not allow water to penetrate it. If there is an area in your house where moisture is rather frequent or even permanent, this choice seems to be the best one. When leaking toilets, overflowing tubs, broken dishwashers, or spilled pet water dishes happen regularly, such a durable vinyl sheet protects the floor against moisture. That is because it is reinforced with fiberglass and installed in one big piece that is cut according to the size just to fit the place.
- Step 1: Clean and smooth the concrete. If you suspect some moisture in the concrete, use a square piece of vinyl. Tape it to the floor with duct tape when it is dry. Take at least a foot square of the material. Leave it on the surface for some time and check whether there is any water or moist on it. It is sure to come from the concrete. There may also be some cracks around your windows or leaks in the joints between the wall and the floor.
- Step 2: Cover the Surface with the Underlay. The underlay is a smooth and thin layer of foam that is applied between the flooring and subfloor. It is used for insulation and making the floor installation process go easier.
- Step 3: Install the Flooring.
If you have a cracks in your basement floor, determine the type of crack and what’s caused it to figure out how to best solve your problem (waterproofing, etc.).
Engineered wood flooring
The feeling of warmth and comfort inside the house depends very much on the type of flooring. If you want to achieve this, opt for wood flooring. This is a quite popular choice because it works well for any interior design. The colors of wood are neutral and they match any style and personal preferences. The thickness of the surface veneer affects very much the cost of such wood flooring. The simplest and most common installation method is floating. This means clicking or attaching the panels for blocking out the possible moisture.
- Step 1: Inspect the boards and remove any of them with defects. Though engineered hardwood is stiffer than conventional plank, do some surface preparation beforehand. If you install the flooring over the concrete, anticipate all the possible problems caused by moisture levels.
- Step 2: Make Up a Floor Plan. Determine the hardwood direction in the rooms.
- Step 3: Remove All Blocking and Obstructions.
- Step 4: Install the Subfloor. Adding a Waterproof subfloor to your basement is an easy and effective way to keep it dry and warm all year round. Even if you believe that you can install the hardwood flooring immediately on the concrete surface simply by gluing it down, think about more durable variants. One of them is preliminary subfloor installing. Or you may also use engineered wood flooring. If it is a basement where flooring needs to be installed, remember that it is located at the below-ground level. That is why it is rather susceptible to leaks and moisture. These problems are very common and can cause much damage to the flooring which is not protected against water. It means that it is also important to add a waterproof subfloor. This is an easy and quite effective way of keeping the main flooring warm and dry irrespective of the season.
· Step 5: If it is applicable, undercut the door cases.
· Step 6: Use the gluing method.
· Step 7: Use the tools from the flooring installation kit, such as the tapping block or the pull bar.
Preventing Basement Flooding
1. Install a leak detector and high-water alarm. These devices are aimed at informing about small leakage-related issues before they have turned into the huge disaster and help you to prevent flood in basement.
2. Insulate your pipes. This step allows decreasing the possibility to face pipes leaking.
3. Maintain your backwater valve. This step allows avoiding the sewer system’s breakdowns.
4. Consider a sump pump as mandatory equipment for the basement.
5. Flush and dump with caution. Debris thrown into the sinks or toilets becomes a frequent reason for floods in a home place because they result in clogs.
Why should I waterproof basement
Basement waterproofing can be a confusing (and expensive) process. But if you’re dealing with leaky foundation walls or water welling up from the floor, finding an effective means of managing these problems could save you a lot in the long run.
Flooded Basement Cleanup and Restoration cost
How much does it cost to have a flooded basement cleanup?
It’s impossible to identify the one cost for cleanup in the flooded basement. Depending on the square area of suffered premises, the scale of damage, type of contamination, and amount of water, the price can vary from $0,000 to $00,000. The average cost paid for complex cleanup is close to $0,000.
Repair costs after a basement flood
The cost of repairs may vary as well depending on different factors. The minor flood repair will cost you $00,000 while the significant damage may require $00,000 – $00,000 to remediate.
What Should I Put on My Basement Floor?
The installation process for the new basement waterproofing can be rather confusing and expensive. So, try to prevent the issues of leaky foundation walls or water streaming from the floor. If you find some efficient technology to manage or avoid such problems, you will save a lot of cost and effort for a long time.
Basement Flooring Services Cost
The average cost of the water proofing and flooring installation includes:
- the foundation sealing;
- wall waterproofing with cement;
- a sump pump or perimeter drain installation;
- deflection of downspout runoff from the foundation;
- injections of epoxy in case of cracks.
The quote is developed for the square foot: ___
Epoxy Floor Coatings Cost
The cost of epoxy coating per one square foot is from $0 to $0. It depends on the type of the epoxy material and the amount of work. The cheapest epoxy is a water-based one ($0.00 per square foot). The price of the 100% solid epoxy is much higher – $ 0.00.
Ceramic tile Installation cost
You can find ceramic tiles for as little as $0.00 per square foot, but they generally run $0.00–$0 per square foot.
Vinyl Basement Flooring Cost
The vinyl sheet flooring costs $0.00 per square foot or even more – up to $0.00. Tiles and planks are more costly – $0.00-$0. If you opt for luxury vinyl flooring, the price goes up to $00 per square foot with installation. For example, to install linoleum or vinyl in a living-room measuring 330 square feet will cost you about $0,000.
Engineered wood flooring cost
Installing hardwood flooring averages between $6 and $12 per square foot
Basement floor average cost
The average cost to waterproof a basement is $0,000 to $0,000, or between $0 and $0 per square foot for materials and labor.
Basement flooring contractors
Tornado Plumbing & Drains is Professional Waterproofing Company for Commercial or Residential Construction. Here are three reasons to call us:
- Experience: Coatings the floor of your basement or cementitious is no easy task: it takes years of expertise to be able to perform safe and enduring quality repairs. Because waterproofing basement floor are an important investment, hiring an experienced waterproofing company is essential.
- Efficiency: Tornado Plumbing & Drains understands, no matter how big your problem is, it needs to be done as soon as possible, so you can go about your daily business.
- Licensing: When you enlist the services of a reliable basement floor company, you can rest assured knowing a licensed contractor who has extensive knowledge will perform the work. Tornado Plumbing & Drains is insured and fully licensed, guaranteeing you receive the best services possible, as well as ensuring you won’t be held liable for any on-the-job accidents.
– phone number: (647) 784-8448
– address: 45 Chauncey Ave, Etobicoke, ON M8Z 2Z2
– E-mail: [email protected]
– link to contact form: https://tornado-plumbing.com/free-quote
Basement Flooring FAQ
How much does a basement flooring cost?
The average cost to waterproof a basement flooring is $0,000 to $0,000, or between $0 and $0 per square foot for materials and labor.
Get A Quote
When you hire us for our services, you know you’re getting highly qualified professionals who have the expertise and experience to make sure your project is done properly and on time.
People Also Search For:
- basement floor ideas
- basement floor plans
- painting basement floor
- cracks in basement floor
- basement leaks where wall meets floor
- basement water seeping through floor
- vinyl basement flooring
- laminate flooring for basement
- waterproof basement flooring
- cheap basement flooring